Building a storage shed

A well-conceived, well-built milking parlor can increase the pleasure and profit obtained from owning and working with dairy goats. A poorly designed parlor can waste time and cause a goat owner to

Many years ago, I bought an old home made lathe at a yard sale. The lathe had been built by somebody many years ago, by welding together half inch thick steel plates and angle irons, and weighed a lo

I built this stand using 2×6’s and a 2×10. The design is based on the bed of the “Low Cost Wooden Longbed” lathe by Carlyle Lynch found on page 72 of Lathes And Turning Techiques. Lynch’s

I have always wanted to have a dedicated vacuum chuck for my lathe but didn’t want to pay the high cost. After doing a lot of research and talking to turners that had built their own system I de

I love the variable speed, but the low speed is too fast – and getting faster. It started at around 600 rpm, but now does not get below 1000. Ordered a new belt to get the speed down (as the belt wear

After gettting out of goats years ago, about 4 years back, I bought just ONE goat….but any goat keeper knows goats are like potato chips…..no one can have just one.

Introduction

“All animals are equal but some are more equal than others.”
-Altered 7th commandment of Animalism
Animal Farm, George Orwell, 1946

Hi Mark,

Sorry it’s taken me so long….

I guess this is more directed toward Soatoz.
I’m interested in your workplace as much as your tools. I have Toshio Odate’s book but would

There are several new resources available for those who are planning new or remodeled tie stall dairy barns. A properly designed and built tie stall barn can provide a comfortable and productive li