Building a storage shed

Many years ago, I bought an old home made lathe at a yard sale. The lathe had been built by somebody many years ago, by welding together half inch thick steel plates and angle irons, and weighed a lo

The review and comments served more than just a warning purpose. It actually made me a lot more satisfied with my lathe.

When I retired in 1996, I thought I would try a little turning. So

I built this stand using 2×6’s and a 2×10. The design is based on the bed of the “Low Cost Wooden Longbed” lathe by Carlyle Lynch found on page 72 of Lathes And Turning Techiques. Lynch’s

If you fill your fly box with your flies you have tied yourself, you know that a vice is one of the most important tools you need. Last week, we looked at source

I have always wanted to have a dedicated vacuum chuck for my lathe but didn’t want to pay the high cost. After doing a lot of research and talking to turners that had built their own system I de

“Now looking at the lathe here, let’s talk about the parts just really quickly. We’ve got the head stock. And in the head stock we have the spindle,

This is the beginning of a series of SketchUp instructions on ‘How toBuild a Garden Shed’, the shed is similar to the Popular Mechanics”Super Shed, and it could be used for practice within SketchUp

I love the variable speed, but the low speed is too fast – and getting faster. It started at around 600 rpm, but now does not get below 1000. Ordered a new belt to get the speed down (as the belt wear

Mar 8, 2007Barbara M. Martin

Many flower gardeners worry about gardening in a shade or part shade location. They mistakenly think “nothing grows in shade” or that a shady g

I started with a very similar lathe (Canwood) and found it a good, inexpensive lathe to learn on. I turned everything from spindles to lidded boxes, bowls and hollow vessels with that lathe. I foun